Safety Tips Using Facebook

Some time ago, there were cases of man killed his wife because his wife changed the status to single on Facebook. Other cases, though not extreme, can occur at any time simply because the kind of networking site Facebook. So how to minimize this happen?

1. Your relationship status is a decision with your partner
Do not ever change your relationship status change if it is not based on mutual agreement between you and your partner. Many cases occur due to bad someone unilaterally change the status. Do not forget, your friends or your partner's friends can see it quickly.

Safety Tips Using Facebook READ MORE, For Complete Article

Tips Avoid From Dangerous of Sex Crimes Via online

Online predator is someone who acts friendly and tried to become a friend of Internet users and young children. But nature keeps ramahnya dangerous mission, ie in order to satisfy their sexual desires.

The perpetrators of this crime are usually operated in chat rooms or social networking site Facebook and MySpace kinds. Mode they use are usually the first time is to win the trust of potential victims.

Everything they do, ranging from lying about their origins until well behaved. For example, the offender was aged 30 years, but when he met in a chat room as a teenager confessed 17-year-old teenager. Lie was even reinforced by images in his account that displayed photos of a handsome teenager 17 years.

Tips Avoid From Dangerous of Sex Crimes Via online READ MORE, For Complete Article

Shortcut To Cleanup "Mailbox"

When downloading e-mails, sometimes there are just an e-mail that went twice. Previous download session that have been downloaded, er now be downloaded again. If the e-mail that this double enggak's just a little problem. But what if the number in the hundreds? Sore thumb can make clean up your mailbox.

But not to worry. Ada kok practical solutions to clean up mailboxes. Here's the trick.

1. Start Outlook 2010 via the "Start> All Programs> Microsoft Office> Microsoft Outlook 2010".
2. Go to the folder you want cleaned, for example Inbox folder.
3. Click the "Folders".
4. On the "Clean up", click "Clean up folder".

Will appear two new menus, the "Clean up the folder" and "Clean up the folder & subfolders". The first option will clear the current folder only, while the other option would be to clean the rest of the following folders subfolders.

When the confirmation appears, click the "Clean up folder".

source: Kompas --->> PCplus

Shortcut To Cleanup "Mailbox" READ MORE, For Complete Article

Lock the Temporary Internet Files Settings

Temporary Internet Files is a gathering of the files from the internet that is born every time you open a web page. These files are intentionally kept so that when you revisit the same web page, the process can run faster.

To alter the Temporary Internet Files, do the following.
1. Select "Start> Control Panel> Network and Internet> Internet Options".
2. On the "General" tab, there are parts that regulate Temporary Internet Files settings are. There are two choices, the "Delete ..." and "Settings". In the option "Delete", you can delete all files in the Temporary Internet Files folder. While the choice of "Settings", you can adjust how maximum capacity that can be accommodated by the Temporary Internet Files folder.

So this setting can not replace digonta by others, do the following.
1. Run the Registry Editor.
2. Sign in to key "HKEY_CURRENT_USER-SOFTWARE-Policies-Microsoft-Internet Explorer, Control Panel".
3. In the right pane, right click, select "New> DWORD Value", then give the name of the Settings tab.
4. Double-click DWORD Value, and insert number 1.
5. Close the Registry Editor.

Now, if you open Internet Options and click the two options on the General tab Temporary Internet Files section, will not affect anything.

Source: PCplus

Lock the Temporary Internet Files Settings READ MORE, For Complete Article

How to Enable an Existing RAM Memory Damage

This time I will share my tips and experiences on dealing with PC memory (SDRAM, DDRAM) that is you think is dead (from not having severe physical damage, such as burnt or damaged / broken), because usually think that I see when the memory is in declared dead by the owner of the PC or by a computer technician will usually be replaced immediately by buying new memory, but memory is still possible to make it in life or work any longer.

I have the following tips to handle memory is considered dead is based on long experience to cultivate the hardware world, with an accuracy of her top 70%, so for example you have 10 pieces of memory, it becomes possible to die 7 pieces can still be saved ... enough in lumayankan? we can save money a few dollars.

Ok, just prepare the memory die, and the equipment needed is Avometer.
1. Clean the memory by way of rubbing memory pins with the purpose of cleaning cloths, thinners may also be a little cleaner to dust, and friction with the cloth will also be fishing the ions on the memory pins to tersimulasi more active conductor.
2. Point Avometer the Ohm scale (scale to measure barriers), may be in the position of free 1K, 10K, 100K ...
3. Take the needle negative (-) Avometer (black cable) and then stick to one pin / leg memory, and the needle positive (red wire) friction on the set of legs IC / chipset memory, if memory IC has 8 pieces such as the friction needle (+) into the legs of these ICs 8.
4. Done .... Please try to install it on the memory slot on the Mainboard ....!

Note:
This process is the use of electric current flow from the battery in Avometer tap into the circuits IC / chipset memory. The way this process is working as the Clear CMOS process if Mainboard Mainboard crashes and does not want to live, namely the disruption or blockage in the way that the flow of electric current needed to for the activation of a system are not met .... or as illustrations of people who fainted or coma and then we try to wake up with a way of fishing the nerve-the nerve to active and conscious way in the flush water, the electric current, etc. ..

How to Enable an Existing RAM Memory Damage READ MORE, For Complete Article

How to Set The Focus Window

We were multitasking, have you ever seen a flash in the taskbar? You know, the usual blinking orange. The color will disappear when we click it.

Blink in the taskbar is no meaning. Taskbar will flash if there is a program in the background that is updated. The results of this update can not usually be seen directly by users because obscured by other windows. Therefore, dimanfaatkanlah flash to notify the user that there is a program that is updated in the background.

If the amount of flicker that appears you deem less conspicuous, try these steps.
1. Run Registry Editor by clicking "Start", then type "regedt32.exe".
2. Go to the sub key "HKEY_CURRENT_USER, Control Panel-Desktop".
3. Double-click "DWORD value ForegroundFlashCount", then change its value according to your wishes. This value will affect how much a blink in the taskbar will appear. Fill in the value of 0 if you want to continue flashing taskbar until there is a clicking.

Conversely, if it was annoying flicker, you can arrange to have the window that should be represented with a twinkle in the taskbar immediately turned into the focus. Here's the trick.
1. Run the Registry Editor, then go to the sub key "HKEY_CURRENT_USER, Control Panel-Desktop)".
2. Find and double-click DWORD value ForegroundLockTimeout.
3. Change the value of the DWORD value to 0 value.
4. Close the Registry Editor, and restart the computer.

If at any time you want to restore the changes you have done this, change the value "ForegroundFlashCount" to 3 and the value "ForegroundLockTimeout" to 200,000.

Source: PCplus

How to Set The Focus Window READ MORE, For Complete Article

Modifications Shortcut On The Context Menu

You'll never find an application that includes the application shortcut in the context menu. Look at Winamp or Windows Media Player. They deliberately put the shortcut in the context menu so that access to a program so more quickly.


How do I create a shortcut like that? Well put on a registry.

Here's how:
1. Open the Registry Editor by typing "regedit" in the Start menu.
2. Go to the sub key "HKEY_CLASSES_ROOT-*- shell".
3. Right-click on the directory of the shell, then, from the context menu, select "New" followed by "Key". A new directory will be created and you can change the name as you wish. The name of this directory which will be shown when the context menu is displayed. Suppose the directory name of "entertainment".
4. In the same way, create a new directory in the directory of entertainment. Give the name "Command" to this new directory. Click the directory "Command", then double click the name of binary data (default) located on the right. After the box "Edit String" appears, the contents of the location (Path) complete the application and the application name, format, and "% 1". Code "% 1" it is optional and serves to run the application automatically. Suppose the location is filled with C:-Program Files-Winamp-winamp.exe "% 1".
5. Now it's time to reap results. Appropriate application example above, try right-clicking on the file with the MP3 format. Shortcut entertainment will be displayed in the context menu. Click on the shortcut and MP3 files that you select will be played.

To remove the context menu you just created, you can simply return to the sub key "HKEY_CLASSES_ROOT-*- shell", then delete all the keys you've ever made.

source: PCplus

Modifications Shortcut On The Context Menu READ MORE, For Complete Article

Tricks Making the New Window Option, When Opening Folder

As a computer user is often required to work with several files in two or more separate folder. If you have this, we are forced to move between folders in a Windows Explorer window.


When experiencing these conditions, so that the process can go faster, try the following trick.
1. Run Registry Editor by typing regedit in the menu "Start".
2. Go to the sub-key "My Computer-HKEY_LOCAL_MACHINE-SOFTWARE-Classes-Directory-shell-".
3. Click the right mouse button on the right side window, then select "New> Key". Give the name "opennew".
4. Double click (Default) which are in the right window, then fill it the Value data to "& Open in New Window".
5. Click "OK".
6. Click the right mouse button, then select "New> Key".
7. Give the new key name with the name "command", then click the key to this point you are in the "My Computer-HKEY_LOCAL_LACHINE-SOFTWARE-Classes-Directory-opennew-shell-command".
8. Fill in the Value Data (Default) to "explorer.exe / e,% 1".
9. Click "OK".
10. Close the Registry Editor and restart the PC.

From now on, you can explore the contents of the folder in a new window with ease. Simply right-click the folder in question, then click "Open in New Window".

source: PCplus

Tricks Making the New Window Option, When Opening Folder READ MORE, For Complete Article

Applications Are Difficult To Remove Deleted By The Registry Editor

If you often try a free application, you must have experienced that the application is still listed in the list of Add or Remove Programs when you've removed from the system. Now, instead of struggling to install other applications to clean it, wash it out through the Registry Editor.

It's easy.
1. Open the Registry Editor window, then find the location "HKEY_LOCAL_MACHINE-SOFTWARE-Microsoft-Windows-CurrentVersion-Uninstall". This directory stores all the names in the application window Add or Remove Programs are stored in a directory.
2. Find the name of the application you want to delete. After the meet, click the directory, then select "Delete" from the menu bar "Edit".

You can also other ways.
1. Right-click the directory.
2. after a context menu appears, select "Delete".
3. Before closing the Registry Editor window, press the "F5" on your keyboard to update the contents of the registry.
4. Without having to restart Windows, open the window of Add or Remove Programs, then look for the name of the original application is difficult to remove. Surely now gone.

source: PCplus

Applications Are Difficult To Remove Deleted By The Registry Editor READ MORE, For Complete Article

Steps To Clean W32/Smalltroj Virus

It's incalculable how much virus is produced during the month of November-December 2009. Average scattered power has a very fast and quite troublesome.

W32/Smalltroj virus. VPCG one malware that wara-wiri at the end of this year. This virus will block access to several security websites and other websites that have been determined by the number switch, which is 209.85.225.99 ip public ip Google.

So every time a user tries to access to certain websites, including website security / antivirus, so that appears not you want the web but the website www.google.com.

Here are 9 steps to clean W32/Smalltroj. VPCG a mixed Vaksincom:

1. Turn off System Restore during the cleaning process take place.

2. Decide who will clean your computer from the network or the Internet.

3. Change the name of the file [C: \ Windws \ system32 \ msvbvm60.dll] to prevent the virus active again.

4. Perform cleaning by using the Tools Windows Live CD Mini PE. This is due to some rootkit files masquerading as services and drivers difficult to stop. Please download the software at the address http://soft-rapidshare.com/2009/11/10/minipe-xt-v2k50903.html

Then boot the computer using software Mini PE Live CD. After that deleting some files iduk virus by:

l Click the [Mini PE2XT]
l Click the [Programs]
l Click the [File Management]
l Click the [Windows Explorer]
l Then delete the following files:

o C: \ Windows \ System32
§ wmispqd.exe
§ Wmisrwt.exe
§ qxzv85.exe @
§ qxzv47.exe @
§ secupdat.dat
o C: \ Documents and Settings \% user% \% xx%. exe, where xx is a random character (example: rllx.exe) with a file size of 6 kb.
o C: \ windows \ system32 \ drivers
§ Kernelx86.sys
§% xx%. Sys, where xx is a random character who has a size of 40 KB (example: mojbtjlt.sys or cvxqvksf.sys)
§ Ndisvvan.sys
§ krndrv32.sys
o C: \ Documents and Settings \% user% \ secupdat.dat
o C: \ Windows \ inf
§ Netsf.inf
§ netsf_m.inf
  
5. Delete the registry created by the virus, by using the "Avas! Registry Editor", how:

Steps To Clean W32/Smalltroj Virus READ MORE, For Complete Article

Trouble Shooting Error On Your Printer

The problems surrounding the printer is a common problem and very frustrating for us. Of course this is very disrupting for computer users. Below are various problems in the printer and how to cope:

Printer can not live
this is caused by several things, among others "
1. Electric power cable not connected to the printer or not installed properly.
Immediately check the cable and plug it right back.
2. Electric power cable to break.
this is because for too long so that the cables used to be broken. To check wear tester.
3. Fuses on the printer end.
To see if the fuse on the printer is still intact or already broken open the printer and remove the fuse. If've seen broken, replace with new fuse.

Fuses life but can not print
The things that cause the printer can not print even though the printer is a flame is:

1. Or tape cartridge has not or is not installed properly. Check and correct kemblai pairs.
2. Paper not yet installed. To attach the paper to the printer can print.
3. Ink for printing is finished. Perform refill ink into the cartridge.
4. At the time of printing, you incorrectly entered the pages to print. Check to be sure that the page that you print is correct or wrong.

Printer prints but not until the end
Here are some things that cause your printer not to print out:
1. At the time of being printed, the printer ink run out.
To overcome this, immediately refill your printer ink.
2. At the time of printing was a sudden power failure.
3. At the time of printing you suddenly close the application program to be printed.
At perceatkan process, you do not close the application window being printed.

Printer print defects
Problem-the problem of this case are:
1. Truncated printouts.
This happens because the needle did not complete the knocker on the printer, or indeed because there is damage to the device driver. In another case the bias occurs because the cartridge is not normal.
For that check the relevant components are like the needle and cartridge knocker, or you can also make a head cleaning again and again.
2. Mold hopping.
This often happens in the dot matrix printer. The cause is not a smooth movement of print head due to dirty or clogged something.
To overcome this problem do the cleaning on the print head.
3. Ink spilled into the mold.
This is often the case, because the wrong cartridge cartridges atautinta the spill.
To overcome this problem, clean the ink is dry on the cartridge and attach it back to the printer.
4. Printer can not print pictures.
This is because the printer Properties less true.
Set up the printer properties correctly through Start / Settings / Control Panel / Printers.

In order for the printer can either keep the premises maintained and always clean the printer from dirt.

Trouble Shooting Error On Your Printer READ MORE, For Complete Article

Fixing the Master Boot Record Error, On Your PC

Actually what is meant by the MBR? MBR stands for "Master Boot Record" which is on the first sector of hard disks and has a function to store information about operating system and then be read by the BIOS.

Damage to the MBR is usually caused by the operating system is damaged, so the computer can not call the operating system to run. Usually an error message is displayed because of damage to the MBR are:

Error loading operating system

Missing operating system

 Invalid partition table

Maybe most of us never find an error message like above. What do we do if you have the above items? The easiest way, of course do reinstall or repair it? But many things that will harm us. The first, we will experience loss of data, especially if all the data stored in My Document. The second we will also lose the applications that are installed along with drivers. Also tired of having to do it again.

If you do not want to suffer, we should first try to make improvements to the MBR. For that let us make improvements in Windows XP and Vista.

Windows XP

1. Make sure the BIOS Boot order is directed to the CD-ROM.

2. Boot the computer using the Windows XP Installation CD. If the screen welcome to set-up has appeared, select the Repair option or simply by pressing the R button on the keyboard.

3. The next process we are asked to enter the location number where the operating system. Usually we choose the number 1. Then press enter. Then enter the administrator password (should know).

4. At the command prompt, type fixmbr. Damage to the MBR now been repaired. Your computer is now using a new MBR. You may also want to run the command fixboot to repair the boot sector with a new one. Now try to restart your computer hard disk through.

Should be noted, make sure you only use this command on a system with one operating system installed. If you have more than one operating system installed, fixmbr and fixboot can derail everything.

Windows Vista

1. First thing is to boot the computer with the Windows Vista disc.

2. Select language, time, currency, etc, and then click Next. Then click on "Repair Your Computer."

3. Select the operating system that will be corrected, and then click Next. If the dialog screen appears "System Recovery Options" select Command Prompt.

4. Type Bootrec.exe and press Enter. This process will improve the boot configuration data. We can also add the option (/ fixmbr), if only to improve and master boot record (/ fixboot) if you just want to fix the boot sector.

Source : PC Guru

Fixing the Master Boot Record Error, On Your PC READ MORE, For Complete Article

An NTLDR or NTDETECT.COM Not Found or Missing Press any key to restart.

This error message appears when Windows XP boot process is in progress and the system encourage you to press any key to restart the PC. These problems usually arise because of the diskette or CD-ROM that still remains dif loopy disk drive or CD-ROOM drive before you boot. Bias is also caused by loss or NTDETECT.COM NTLDR files from your hard drive.

Solution:

• Blank floppy disk or CD from the drive and restart the PC.
• If the message still appears, masukklah into the BIOS menu, and change the boot sequence (boot sequence) computer to boot from the first time from the CD-ROOM. Save the changes.
• Insert the Windows XP installer CD, then restart the PC.
• Select the option to boot from the CD-ROOM.
• When the screen appears the words "Welcome to Setup," press the [R] on your keyboard to run the Recovery Console.
• If and have a dual-boot configuration, select the operating system you want to access.
• Enter the password you Administrtor Windows XP. If you have not previously set it, you live press [Enter].
• Then type copy of X: i386NTLDR C: and press [Enter],
• Continue by typing copies of X: i386NTDETECT.COM C: and press [Enter].
• Change the X: partition letters CD-ROM drive you.
• Remove the Windows XP installer CD, then restart your PC again.

An NTLDR or NTDETECT.COM Not Found or Missing Press any key to restart. READ MORE, For Complete Article

Automatic Reading Excel Data Text

Working with a spreadsheet is not easy, especially if you are required to maintain the accuracy of the data contained there. Now, with Text to Speech feature, you can make the computer read any text that is inserted into Excel to do the verification. Here's how to activate it.

1. On the "Tools" menu, select "Speech", then click "Show Text to Speech Toolbar".
2. Select the cell you want to read.
3. On the toolbar "Text to Speech", click "By Rows" to the computer to read per line, or select 'By Columns' to the computer to read data per column.
4. Click the "Speak Cells" to the computer to read the cell that you select.
5. If you find errors in the data, click on "Stop Speaking", and then use the mouse to fix it.
6. Click the "Speak Cells" to continue.

In order for Excel to read any data you enter into the cell, this trick jajal.

1. On the "Tools" menu, select "Speech", then click "Show Text to Speech Toolbar".
2. On the toolbar "Text to Speech", click the "Speak On Enter". Furthermore, every time you enter data in a cell and press Enter, the computer will read the data in these cells.

Source: PCplus

Automatic Reading Excel Data Text READ MORE, For Complete Article

Uninstall Windows XP from Command Prompt

One feature that has Windows XP is the ability to uninstall XP after we managed to upgrade from Windows 98, 98SE, or Windows Me. Uninstall generally done via the tool [Add / Remove Programs] in the Control Panel in Windows normal boot conditions.

However, if the way is not successful, we can go into Safe Mode and remove Windows via Add / Remove Programs. If this way failed, perhaps the only way is through the Command Prompt.



The following way:
1. Type cd and press [Enter].
2. Type cd-windows-system32 and then press [Enter].
3. Type osuninst.exe and press [Enter].

Next follow the instructions on the screen that will help restore the computer to a previous operating system.

Keep in mind, this way can only be done if prior to upgrade to Windows XP you have to backup the previous operating system, otherwise you have to do it as Administrator or user who has administrator access.

Source : PcPlus

Uninstall Windows XP from Command Prompt READ MORE, For Complete Article

Use Voice Command Office

Ditto with Windows Media Player, you can also use a voice command Office or the so-called speech recognition. In addition, you can also dictate or select menus, toolbars, and dialog boxes using voice (in English).

Never use this application? You can do the installation by clicking the "Speech" on the Tools menu in Microsoft Word, or run a Custom installation during installation of Microsoft Office. Once installed, the button will appear in Speech Tools menu in all Microsoft Office programs.

To start using it, you need a microphone connected to the sound card or USB, a computer with a minimum speed of 400MHz or more, at least 128MB RAM or more, and Windows 98 until the latest.

There are two options available modes of this feature, the Voice Command and Dictation. Voice Command mode allows you to give commands in Microsoft Word, for example, to select menus, toolbars, dialog boxes, or to change the format of the document. While to dictate Microsoft Word so you do not need to type them with the keyboard, select Dictation mode. To switch between Voice Command mode and Dictation, just click the button on the Language bar or by saying "voice command" or "dictation" on the microphone.

Examples of speech recognition to change the font via voice:
1. To open the Font box on the Formatting toolbar, saying: "Font".
2. To change the font of Times New Roman to Verdana, said: "verdana".

Use Voice Command Office READ MORE, For Complete Article

Print Quickly More In Command Prompt

Operating system Microsoft Windows 2000 is one of the operating system tough enough for business networks. Therefore, no wonder so many corporations are using this operating system on all computers connected to the network.

Not infrequently, the program-DOS-based programs is still being used even though your primary operating system is Windows 2000. Your actions are not wrong, because these programs can still work well and quickly on the Windows 2000 operating system. Except for the printing business Windows 2000 has a few problems with the program-DOS-based programs. Response time to do the printing was much slower than when printing a document that was opened by a Windows-based applications.

The solution of the problems above can you do with the way:
1. Run Registry Editor by clicking [Start] and then type regedit.exe.
2. Go to the subkey HKEY_LOCAL_MACHINE-SYSTEM-CurrentControlSet-Control-WOW.
3. Find the String Value with LPT_timeout name, and then double-click the String Value.
4. Change the Value Data previously bernailai 15 to 3.
5. Click [OK] and close the Registry Editor window. Now, try to print again through the Command Prompt.

Source : PCPlus

Print Quickly More In Command Prompt READ MORE, For Complete Article

Discard the Windows Vista UAC

User Account Control (UAC) in Windows Vista is a feature to prevent the program install it too arbitrarily. People who can install only those programs that have access as administrator. Although the administrators who install, the program must have access to a new level once tinggu can walk. Levels were determined by the administrator.

This user-level divisions have actually been used, even decades. But, the division is only for servers and mainframe computers. Desktop computer operating systems, especially Windows, not during it. In the MS-DOS, Windows 95, Windows 98 and Windows Me, all the user is a super user (super user) can control the PC in full.

The division was a new level in Windows after that. To strengthen the division level, Microsoft is using the UAC in Windows Vista and Windows Server 2008.

Briefly how it works this way. When a computer user into the standard account, a token contains the standard permits were granted to the user. With a standard license, the user can not make changes that affect the system. He still can create documents, edit photos, or listening to the song. But, he can not install programs, change the settings in the Control Panel, or to update.

Different if the administrator is logged. Accounts were given two tokens. The first token of "appreciation" of the administrator-all actions permitted. The second token is similar to the token given to the standard account. Various applications, including the Windows Shell, run by the second token.

Thus, many applications still can not use Windows resources fully. New applications that can run full if given permission.

In Windows 7, Microsoft's update UAC. By default, UAC will no longer ask some programs. Some programs still make UAC appears.


UAC was aware of this can be very annoying. Try it note, how many times you must click on the approval for the installation work? PCplus assume you install a program that is already trusted. People who frequently claimed tweaking UAC is often disturbed by this.

UAC is a good goal. But, if it's too annoying, you can turn it off. The following tricks are hardly a total turn off UAC, though there was 1 trick to turn it off completely. But at least, UAC is no longer so disturbing.
Anyway, just refer to trick-trick.

PCplus not recommend this trick for security. If there are hobby people downloaded the program and try it on your computer, PCplus suggested that UAC is not disabled. But, if you keukeuh because you only use your computer and not a download, please apply this trick.
1. Open the Control Panel.
2. Click "User Accounts".
3. Then click "Turn User Account Control on or off".
4. When the dialog box appears, click "Continue".
5. Uncheck the "Use User Account Control (UAC) to help protect your computer" then click "OK".
6. Asked to restart the computer? Well done, restart it.

source: PCplus

Discard the Windows Vista UAC READ MORE, For Complete Article

Making Poster Music Being Unique

Look at the posters music concerts. Media is always designed with a unique but interesting. Utilizing vector application, you can create your own. Use one of your shots picture, tracing the image is a picture, distortion letters, and create a fractal effects. The result? A poster created music that you can easily and beautifully. All you need is a vector application.

Interested in trying? Just follow the steps below. As an application, CorelDRAW X4 PCplus use.


1. Make a box using [Rectangle Tool] the size of the area as a background image with a color that you set yourself. Enter a photo by clicking on [File]> [Import ...]. Find and click on the image files to be included. Click [Import].

2. To begin the process of changing from a bitmap image into vectors, click the [Trace Bitmap], then select the desired mode tracing. Here, PCplus choose [Outline Trace]> [Line art ...]. Wait until the dialog box appears.

3. In order to view the image look smoother tracing results, set the slider "Smoothing" to number 50 or more. Select [RGB] for Color Mode. You can see the results of tracing the changes in the right preview window. If it fits, click [OK].

4. Place the tracing image to the desired location. You can resize it by dragging the corners of the image with the pointer. Next, make a star for the background. Click the [Star Tool], then click-drag the pointer in the image area.

5. Click stars with [Pick Tool], and color by clicking on the color palette. Eliminate his outline. Drag the image to the back to decorate the background by pressing [Ctrl] + [Page Down]. Double star by pressing [Ctrl] + [D] to be fractal.

6. Fractal can be created by distorting forms of using the facility [Interactive Distortion Tool]. Select the type of distortion of the three options available in the toolbar: Push and Pull, Zipper, and Twister. To form a fractal, Push and Pull can be used.

7. Click-drag the form of stars made up to a distorted shape. Direction of pull will form a different fractal. Make taste. Pressure distortion can you manage to draw a box near the blue arrows.

8. To change the direction of a fractal, drag the white box-shaped diamond in the middle of the form. Drag the corners to enlarge or reduce fractal if necessary. You can also menggandakannya to appear more colorful background.

9. Type the text. Paint and resize as needed. So that the text right in the middle of the poster, click on [Pick Tool], followed by the [Arrange]> [Align and Distribute]> [Center to Page]. For the title, put the text to the top by pressing the arrow keys on the keyboard.

10. Plated to give effect to the unique title text. Enable [Interactive Contour Tool] in the toolbox, under conditions selected text by [Pick Tool]. Make sure that the option [Outside] elected. Determine the value of "Contour Offset" by clicking the drop-down button is there. Instantly, the layer will be visible immediately.

11. Set the number of layers in the menu "Step Counter" in the left side of the previous menu. To change the color of the text layer with other colors, do it via the drop-down menu "Fill Color" in the option bar. Having selected a new color gradation of the color layer will change.

12. Add the appropriate text in the style of the musicians musical flow. In order not to be too distracting display at the front of the object, PCplus transparent effect using [Tranparency Interactive Tool] on fractal star image and the back. Overlapping effect was more visible.

Source: PCplus

Making Poster Music Being Unique READ MORE, For Complete Article

How to Computer Old As Firewall

A firewall is a device that can manage data traffic in the network. He can filter the data so that only data that is considered safe to be entered into a computer or network. "Castle of fire" was used to protect against "attack" or "smugglers" from outside the network.

Not only was it the task of a firewall. Security device that can also be used for access control-who can access the network and who should not. During the operation, he recorded all the events and report it to administrators.

Firewall there are two kinds, namely personal and network. Personal firewall designed to protect a computer connected to the network. Windows Firewall is one example of personal firewall applications.

While the network firewall designed to protect the network. This network firewall there are two forms, can be hardware, could also be the software. There is a special hardware for the firewall. But, we also can make a hardware firewall with a PC. Well, if your home is an old PC idle, use it to protect the computer network in your home.

In the PC, we will install a software. No need to buy, just download it, eh do not need to download also on the CD because there is also PCplus edition. SmoothWall Express is a free software is quite reliable. Although made based on the Linux operating system, open source firewall is still available in versions of Windows.

SmoothWall is designed to be easy to use and set-set through a web-based interface. Essentially practical. We do not need to have my level of knowledge in an office network administrator to use this software.

Let us install and use immediately.

1. SmoothWall Express Burn ISO to a CD. If SmoothWall Express is a CD, boot the computer using the CD that came SmoothWall screen. Press "Enter" to change the screen display. Once again, press "Enter".

2. Next will come the demand to enter the SmoothWall Express CD into the CD-ROM. Since the CD is in your CD-ROM is a CD that's right, just press "Enter".

3. The next dialog box to tell if the SmoothWall is installed. Again, press "Enter". Further confirmation will appear stating that the disk will be formatted. Approve the request by just pressing "Enter". Wait a moment until the new window appears that says the success of the installation.

4. The next process is to manage SmoothWall Express. SmoothWall will offer automated configuration process when previously you've been setting SmoothWall. Since this new configuration the first time, replied with "No".
5. The next window will ask for the keyboard mapping. Select the type of keyboard "UK" and press "Enter" to continue.

6. Enter a name for the "hostname". You are free to name this hostname. What is clear, do not use special characters such as spaces, numbers, underscores. This name will be called on the network when someday you want to access the firewall. In satandar, hostname will be filled "smoothwall".

7. The next window is the "default security policy". In this window, you can determine how tight the security level is applied. Options "Open" will make all the open access. Options "Half-open" to make some open access, others closed. Access closed access is usually considered to be risk of attack. Now, if the option "Closed" will close all access. Select the option in accordance with the security level you want, then press "Enter".

8. In the window "Network configuration menu", select "Network configuration type", then press "Enter". When the window "Network configuration type" open, select the type of configuration according to your network. Select the "Green" if your network is connected to the Internet via a modem or ISDN. Select the "Green + Red" if your network is connected to the Internet via a network card. If your wireless network and the Internet connect to the internet with a modem, select "Green + Purple (Red is modem / ISDN)". Select the "Green + Purple + Red" if your network card is connected to a wired network, wireless and internet.

9. Next, select the menu "Drivers and card assignments". There you are asked to set up your network card. Configuration that is here is very dependent on the brand and type of network card you use. If so, press "Enter".

10. In the next window, select the "Probe" SmoothWall to automatically detect the network card. Once detected you need to specify which network card was detected in the category "Green" or "Red". Select the "Green" and press "Enter".

11. Press "Enter", to return to the "Network configuration menu. Now click the "Address Settings". Select the "Green" on this window. When a warning window appears, just answer with "OK".

12. Next you will be prompted to enter the IP address of the network following his mask in the window "Green Interface". If so, click "OK".

13. Repeat steps 11 and 12 until all the network card is configured successfully, both in orange or purple category. To access the Internet via a network card (RED), select option "RED" and press "Enter". Select "Static" if your static IP given by ISP. Select DHCP if you use dynamic IP. Select "PPPOE" if you use the "Point to Point Protocol Over Ethernet" to connect to your ISP. This choice depends on your ISP settings. Just ask them to know for sure. When we select the DHCP option, then we have to fill "DHCP hostname" from the ISP. If we use static IP, of course, we must enter the IP address and network mask. When everything is complete, press "OK".

14. Now it's time you select the "DNS and Gateway settings". Enter "IP control" and "IP gateway". Press OK and select Done to close the Network Configuration menu.

15. Now you'll be taken to "Section menu. Here you can set the proxy, ISDN, ADSL, and DHCP server. If you do not use it, pass it directly by pressing the "Finished".

16. You are asked to enter an administrator password twice. Minimum password length of 6 characters and maximum 25 characters. This password will be used to manage web-based SmoothWall at this initial configuration is complete. Finally, a confirmation window will appear that the setup process is complete. You can press OK to restart the PC.

17. After restarting, you can access via browser SmoothWall Express. Enter the computer name or IP address of the firewall in the browser, for example: http://smoothwall:81 or https: / / 192.168.0.2:441. You can access the server via HTTPS via port 441 or port 81 via HTTP. When the warning appears on the digital certificate, accept the certificate.

18. Enter admin as the username and password fill in accordance with the password you specified in the configuration process at the beginning of the installation. Page SmoothWall displays IP configuration and data traffic has been running like. To further firewall configuration changes can be done through a web-based interface is. Not have to worry again with a complicated configuration in the beginning.

Source: PCplus

How to Computer Old As Firewall READ MORE, For Complete Article